How To Put A Eagle Torch Lighter Back Together

Download Article

Download Article

Sometimes a lighter can get stuck or broken. Generally it's a quick fix, but it's as well very piece of cake to buy a new one. The first step is diagnosing what is wrong with your lighter, and and then you can get to work fixing it. Don't get frustrated if information technology doesn't work immediately - cheque all potential problems before you give up. If your lighter has sentimental value you may be able to get it working again.

Things You Should Know

• Ensure the lighter isn't shattered first. Look for rust, debris, and clay, cheque the fuel tank, and see if there'southward a spark to diagnose the problem.
• Refuel the lighter with butane. If the flame burns out, remove the metallic around the flame hole.
• Replace the flint on your lighter. You lot can do this for both butane lighters and Zippo lighters, though the method varies.

1. one

   Ensure that it isn't shattered. If you broke the plastic role of your lighter then y'all'll need a new one. The force per unit area is compromised and you won't be able to employ it anymore.

2. two

   Wait for rust, debris, or dirt. If you've left a lighter outside for a long period of time the metal wheel on top might exist rusted in place. If it won't spin, it won't light. If there is just dirt and debris within the lighter you might be able to make clean it out with your fingers or a pipe cleaner and get it going again. ^[1]

   Advert

3. iii

   Check the fuel tank. Luckily the most common problem with these lighters is their incredibly small fuel tank. When this no longer holds enough fuel or enough pressure, information technology needs to be refilled.

   • The nigh prone to mechanical and/or internal failure would be the not-reusable Bic lighters.

4. iv

   Wait to see if there is a spark. If there is no spark, that means that there is no flint. The flint is the piece of equipment that the wheel rubs against to create a spark. The spark lights the fuel and gives you lot a flame, so the flint is extremely important.

5. 5

   Bank check to see if the flame is small, burns out, or isn't present at all. If the flame burns out and so you lot could be running out of fuel. Yet, if yous just recently bought the lighter there might exist an event with the fuel reaching the spark.

Advertisement

1. 1

   Refuel your lighter. To do this for virtually lighters y'all'll demand to buy a butane can. You can buy one of these at your local hardware shop. Make sure yous bleed all of the remaining fuel out of your lighter outset. Turn the lighter upside down with the fill up valve facing upward. Put pressure on the fill valve and keep the lighter away from your face and away from annihilation flammable. ^[2]

   • Make certain the butane tin nozzle fits in the pigsty in the lesser of the lighter. It has to fit in the upright position with the lighter on acme of can. You lot'll want to insert the nozzle and so flip the whole contraption upside downward then that the lighter is nether the can. At present utilise pressure until you experience the metal of the lighter become cold. That means you've successfully gotten the butane inside.
   • For a Nothing lighter you'll take to buy Zippo lighter fluid from the Zippo online store.^[3]
   • Keep in listen, it's probably but easier to purchase a new lighter unless you are attached to your current one.

2. ii

   Supercede your flint on a butane lighter. ^[4] The flint is the piece of equipment that creates the spark. It's tiny blackness cylinder about a quarter inch long. To replace the flint, remove the metal surrounding the flame and the spark wheel. You lot'll take to twist it out of position. Once you have removed the metal you'll see that there is a spring. The leap should exist near an inch to an inch and a half long. The flint is the modest piece of equipment that is virtually a quarter inch. It volition be black and cylindrical. The flint is used to make the spark. Remove the flint from this jump. At present put in a new piece of flint. Reassembling the lighter is piece of cake - put the flint in, stick the spring back in the pigsty, so place the meridian back on.

   • You tin can buy a new flintstone for 75 cents online.

3. iii

   Replace your flintstone on a Naught lighter. To replace the flint, pic open the lighter, and pull upwards on the chimney. The chimney is the thing with 5 holes of each side of it. You'll want to pull until its all the fashion out. Under the chimney at that place should exist a slice of what looks like cotton that is held in place past a screw. Advisedly unscrew the screw and pull it out along with the spring and small piece of metal within. Driblet the new flint in, replace the spring, tighten the screw, and supplant the box back in the lighter casing. You lot should be good to get. ^[5]

4. 4

   Remove the metal that surrounds the flame hole if information technology is small or burns out. This means you accept a trouble with your fuel release. Yous can exercise this with tweezers, needle-nose pliers, or anything else that works. Turn the nozzle from which the gas escapes counter-clockwise a few times. It might only be too tight. If that doesn't piece of work you might might need to get yourself a new 1. Luckily they aren't that expensive. ^[6]

Advertisement

Ask a Question

200 characters left

Include your electronic mail address to get a message when this question is answered.

Submit

Advertisement

• Bic lighters commonly have a child-proof safety-band over the spark wheel which can become quite abrasive...but to get rid of it just remove the metal the surrounds the flame and pull up on the condom band until its complimentary (with pliers or fingers)

• The easiest style to remove the metal around the flame (or "chimney") would be to use a blade or slender object to pry the side away from the button...just far enough to make information technology over the latch that holds it in identify

• When refueling a Cipher, it helps to leave the lighter upside down for a few seconds or a minute after having put more lighter fluid in

Show More Tips

Advertisement

About This Article

Article Summary X

If your lighter isn't working, check to see if the fuel tank is empty or the flintstone is gone, as these are unproblematic to fix. Earlier you refuel your lighter, purchase a butane can, which tin can commonly be found at a local hardware store. To refuel, turn your lighter upside downward and put pressure level on the fill valve with the butane tin nozzle. Once the nozzle is inside, apply force per unit area until yous experience the metal of the lighter get cold. Brand sure to go along your lighter abroad from your confront and annihilation combustible. If your lighter needs a new flint, twist the metal that surrounds the flame until it comes off and you can see a spring. So, supercede the flint fastened to the spring and reassemble your lighter. For more advice, like how to replace the flintstone on a Cipher lighter, scroll down.

Did this summary help you?

Thanks to all authors for creating a page that has been read 559,948 times.

Did this article aid you?

Source: https://www.wikihow.com/Fix-a-Lighter

Share this post